- 3 Day Aluminium Painting
- AAMA 2605 Powder Coatings
- Metallic Paint Color Variation
- AAMA Specifications for painting architectural aluminum
- GMW16721Aluminum Pretreatment
- Painting Guidelines for aluminum finishing at SAF
- Paint Maintenance & Cleaning
- Powder Coating-Series 29 Guide Specifications
- Photos of SAF Painted Projects
- Touch Up Paint
Guide Specification for SERIES 29 POWDER COATINGS for Aluminum
by Tiger Drylac USAas applied by SAF
Finish on exposed aluminum surfaces
- Electrostatic applied polyester powder coating based on Tiger-Drylac USA, Inc., TIGER-Drylac Series 29 Powder Coating applied by Southern Aluminum Finishing Co, Inc.
- Finish coat: One coat of powder coating based on Polyester for commercial architecture.
Minimum thickness shall be 2.5 – 3.5 mils dry film thickness
**OR**
RETAIN BELOW FOR BUILDING WITH DIRECT EXPOSURE TO SALT AND FOG ALONG SEA SHORE.
- Finish coat: Two coats of powder coating based on Polyester for commercial architecture. Coat twice to obtain minimum 3.5 – 5 mils thickness on edges and corners.
- Cure first coat between 392’F (200’C) for 5 minutes and 356’F (180’C) for 10 minutes.
- Cure second coat between 392’F (200’C) for 22 minutes and 356’F (180’C) for 35 minutes.3) Measure temperature at substrate.
2. Color: Standard color selected by Architect from manufacturer’s standard color selection.