FOR IMMEDIATE RELEASE
Public Relations Contacts:
John McClatchey, VP of Sales & Marketing
SAF
1401 Blairs Bridge Rd
Lithia Springs, GA 30122
(404) 355-1560
JBJ@saf.com
Jake Michalski
BLD Marketing
(412) 347-8023
jake.michalski@bld-marketing.com
Photos: https://bldpressroom.com/saf/x-ray-fluorescence
SAF Implements High-Tech Solution to Improve Aluminum Finishing Process
X-Ray Fluorescence Technology Instantly Measures to Key Industry Standard
ATLANTA, GA (January 4, 2022) – SAF, a global metals distributor, fabricator, and finisher a global metals distributor, fabricator, and finisher, is substantially improving its ability to confirm the quality of coatings it applies to aluminum thanks to the introduction of a new tool. The company is now incorporating X-ray fluorescence spectroscopy (XRF) technology into its polyvinylidene fluoride (PVDF) finishing process. The enhancement enables SAF to provide its customers with verification that its coatings meet key industry standards for performance and durability set by the American Architectural Manufacturers Association (AAMA).
“In the anodized aluminum industry, there is a saying that your finish is only as good as the aluminum you are anodizing. With PVDF paints, your painted finish is only as good as the pretreatment,” said John McClatchey, vice president of sales and marketing at SAF. “A real-time XRF measurement provides a more scientific way of measuring the weight of the chromatic film coating on aluminum.”
For a PVDF coating to be properly applied to aluminum, the metal must undergo a chemical bonding process that forms a complex chromate film on its surface, commonly referred to as a conversion coating. Often, fabricators evaluate the quality of this conversion coating by the color of the metal. However, color does not always correlate with the correct chromatic film coating weight. By using XRF technology, SAF can accurately measure the quality of its conversion coatings. For customers, this ensures an accurate pretreatment, which leads to a successful PVDF application and a long-lasting architectural finish.
“By using XRF technology, architects, installers, owners, and other stakeholders involved in the construction process know that the finish will last on the aluminum products they are purchasing from SAF,” added McClatchey.
The XRF analyzer works by emitting X-rays and collecting fluorescence radiation from the metal. The test determines whether the metal meets AAMA 2605. With this analyzer, the results are available in seconds as opposed to traditional laboratory testing, which can take days.
“Today, only a few PVDF applicators are using XRF technology to verify that their aluminum is properly pretreated,” added McClatchey. “It’s another example of how SAF remains on the leading edge of metal finishing for architectural aluminum.”
About SAF:
For 75 years, SAF has served as one of the nation’s most complete sources for metals distribution, finishing, and fabrication. SAF is a mill-direct aluminum buyer, an approved fabricator for major aluminum composite panel (ACM) manufacturers, and a mill-direct buyer of aluminum coil and extrusions. In addition to providing custom fabrication, painting, and anodizing, SAF Fabrication engineers aluminum, panel, and column systems for commercial building projects worldwide. For more information, visit www.saf.com.
###